View HLMP-EL08-T0000_36445.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Agilent HLMP-EDxx/EGxx/ELxx 5 mm Precision Optical Performance Best Value AlInGaP Lamps
Data Sheet
Description These Precision Optical Performance AlInGaP and AlInGaP II LEDs provide superior light output for excellent readability in sunlight and are extremely reliable. These LED lamps are untinted, nondiffused, T-1 3/4 packages incorporating second generation optics producing well defined spatial radiation patterns at specific viewing cone angles.
These lamps are made with an advanced optical grade epoxy, offering superior high temperature and high moisture resistance performance in outdoor signal and sign applications. The high maximum LED junction temperature limit of +130C enables high temperature operation in bright sunlight conditions. The package epoxy contains both uv-a and uv-b inhibitors to reduce the effects of long term exposure to direct sunlight.
Features * Well defined spatial radiation pattern * Viewing angles: 6, 15, 23, 30 * High luminous output * Two red and amber intensity levels AlInGaP (bright) and AlInGaP II (brightest) * Colors: 626/630 nm red 590/592 nm amber * Superior resistance to moisture * UV resistant epoxy Benefits * Viewing angles match traffic management sign and requirements * Colors meet automotive and pedestrian signal and specifications * Superior performance in outdoor environments * Suitable for autoinsertion onto PC boards Applications * Traffic management: Traffic signals Work zone warning lights Variable message signs * Commercial outdoor advertising: Signs Marquees * Automotive: Exterior and Interior Lights
Device Selection Guide for AlInGaP Typical Viewing Angle 21/2 6 6 15 15 23 23 30 30 6 6 15 15 23 23 30 30 Color and Dominant Wavelength (nm), Typ. [4] Red 626 Red 626 Red 626 Red 626 Red 626 Red 626 Red 626 Red 626 Amber 590 Amber 590 Amber 590 Amber 590 Amber 590 Amber 590 Amber 590 Amber 590 Luminous Intensity Iv (mcd) [2][3] at I F = 20 mA Min. 2170 2170 590 590 450 450 270 270 2170 2170 450 450 345 345 270 270
Part Number HLMP-EG08-T0000 HLMP-EG10-T0000 HLMP-EG15-N0000 HLMP-EG17-N0000 HLMP-EG24-M0000 HLMP-EG26-M0000 HLMP-EG30-K0000 HLMP-EG32-K0000 HLMP-EL08-T0000 HLMP-EL10-T0000 HLMP-EL15-M0000 HLMP-EL17-M0000 HLMP-EL24-L0000 HLMP-EL26-L0000 HLMP-EL30-K0000 HLMP-EL32-K0000
Leads with Standoffs No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes
Package Drawing A B A B A B A B A B A B A B A B
2
Device Selection Guide for AlInGaP II Typical Viewing Angle 21/2 15 15 15 15 23 23 23 23 30 30 30 30 15 15 15 15 23 23 23 23 30 30 30 30 30 Color and Dominant Wavelength (nm), Typ. [4] Red 630 Red 630 Red 630 Red 630 Red 630 Red 630 Red 630 Red 630 Red 630 Red 630 Red 630 Red 630 Amber 592 Amber 592 Amber 592 Amber 592 Amber 592 Amber 592 Amber 592 Amber 592 Amber 592 Amber 592 Amber 592 Amber 592 Amber 592 Luminous Intensity Iv (mcd) [2][3] at I F = 20 mA Min. 1650 1650 1650 1650 1300 1300 1300 1300 1000 1000 1000 1000 1650 1650 1650 1650 1000 1000 1000 1000 765 765 765 765 1000
Part Number HLMP-ED16-S0000 HLMP-ED16-S0T00 HLMP-ED18-S0000 HLMP-ED18-S0T00 HLMP-ED25-R0000 HLMP-ED25-R0T00 HLMP-ED27-R0000 HLMP-ED27-R0T00 HLMP-ED31-Q0000 HLMP-ED31-Q0T00 HLMP-ED33-Q0000 HLMP-ED33-Q0T00 HLMP-EL16-S0000 HLMP-EL16-S0R00 HLMP-EL18-S0000 HLMP-EL18-S0R00 HLMP-EL25-Q0000 HLMP-EL25-Q0R00 HLMP-EL27-Q0000 HLMP-EL27-Q0R00 HLMP-EL31-P0000 HLMP-EL31-P0R00 HLMP-EL33-P0000 HLMP-EL33-P0R00 HLMP-EL31-Q0R00
Leads with Standoffs No No Yes Yes No No Yes Yes No No Yes Yes No No Yes Yes No No Yes Yes No No Yes Yes No
Package Drawing A A B B A A B B A A B B A A B B A A B B A A B B A
Notes: 1. 21/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity. 2. The luminous intensity is measured on the mechanical axis of the lamp package. 3. The optical axis is closely aligned with the package mechanical axis. 4. The dominant wavelength, d, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
3
Part Numbering System HLMP-X X X X - X X X X X MECHANICAL OPTIONS 00 - Bulk Packaging DD: Ammo Pack COLOR BIN SELECTIONS 0: No color bin limitation K: Color bins 2 and 4 4: Amber color bin 4 only R: Amber color bins 1, 2, 4, and 6 with VF max of 2.6 V T: Red color with VF max of 2.6 V MAX INTENSITY BIN MIN INTENSITY BIN VIEWING ANGLE and LEAD STANDOFFS 08: 6 degree without lead standoffs; AlInGaP 10: 6 degree with lead standoffs; AlInGaP 15: 15 degree without lead standoffs; AlInGaP 16: 15 degree without lead standoffs; AlInGaP II 17: 15 degree with lead standoffs; AlInGaP 18: 15 degree with lead standoffs; AlInGaP II 24: 23 degree without lead standoffs; AlInGaP 25: 23 degree without lead standoffs; AlInGaP II 26: 23 degree with lead standoffs; AlInGaP 27: 23 degree with lead standoffs; AlInGaP II 30: 30 degree without lead standoffs; AlInGaP 31: 30 degree without lead standoffs; AlInGaP II 32: 30 degree with lead standoffs; AlInGaP 33: 30 degree with lead standoffs; AlInGaP II COLOR D: 630 nm Red G: 626 nm Red L: 590/592 nm Amber PACKAGE E: 5 mm Round AlInGaP
4
Package Dimensions A
8.71 0.20 (0.343 0.008) 5.00 0.20 (0.197 0.008)
B
5.00 0.20 (0.197 0.008)
1.14 0.20 (0.045 0.008)
d
8.71 0.20 (0.343 0.008)
2.35 (0.093) MAX. 31.60 (1.244) MIN.
31.60 (1.244) MIN.
1.14 0.20 (0.045 0.008)
1.50 0.15 (0.059 0.006)
0.70 (0.028) MAX. CATHODE LEAD
CATHODE LEAD
0.70 (0.028) MAX.
1.00 MIN. (0.039)
0.50 0.10 SQ. TYP. (0.020 0.004)
1.00 MIN. (0.039)
0.50 0.10 SQ. TYP. (0.020 0.004)
CATHODE FLAT
5.80 0.20 (0.228 0.008)
CATHODE FLAT
5.80 0.20 (0.228 0.008)
2.54 0.38 (0.100 0.015)
2.54 0.38 (0.100 0.015)
Notes: 1. All Dimensions are in millimeters (inches). 2. Leads are mild steel, solder dipped. 3. Tapers shown at top of leads (bottom of lamp package) indicate an epoxy meniscus that may extend about 1mm (0.040 in.) down the leads. 4. Recommended PC board hole diameters: * Lamp package A without standoffs: Flush mounting at base of lamp package = 1.143/1.067 (0.044/0.042). * Lamp package B with standoffs: Mounting at lead standoffs = 0.965/0.889(0.038/0.035). 5. For dome height above lead stand-off seating plane, d, lamp package B. See table.
Part Number HLMP-xx10 HLMP-xx17 HLMP-xx26 HLMP-xx32 HLMP-xx18 HLMP-xx27 HLMP-xx33
d 12.37 0.25 (0.487 0.010) 12.43 0.25 (0.489 0.010) 12.52 0.25 (0.493 0.010) 11.96 0.25 (0.471 0.010) 12.60 0.25 (0.496 0.010) 11.59 0.25 (0.446 0.010) 11.99 0.25 (0.472 0.010)
5
Absolute Maximum Ratings at TA = 25C Parameter DC Forward Current [1,2] Peak Pulsed Forward Current[2] Average Forward Current Reverse Voltage (IR = 100 A) Power Dissipation LED Junction Temperature Operating Temperature Storage Temperature Dip/Drag Solder Temperature Through-the-Wave Preheat Temperature Through-the-Wave Solder Temperature Value 50 mA 100 mA 30 mA 5V 120 mW 130C -40C to +100C -40C to +120C 260C for 6 secs 145C 245C for 3 secs
Notes: 1. Derate linearly as shown in Figure 4. 2. For long term performance with minimal light output degradation, drive currents between 10 mA and 30 mA are recommended. For more information, please refer to Application Brief I-024.
6
Electrical/Optical Characteristics Table TA = 25C Parameter Forward Voltage Amber (d = 590 nm) Red (d = 626 nm) Amber (d = 592 nm) Red (d = 630 nm) Reverse Voltage Peak Wavelength Amber (d = 590 nm) Red (d = 626 nm) Amber (d = 592 nm) Red (d = 630 nm) Spectral Halfwidth Speed of Response Capacitance Luminous Efficacy Amber (d = 590 nm) Red (d = 626 nm) Amber (d = 592 nm) Red (d = 630 nm) Thermal Resistance Symbol Min. Typ. 2.02 1.90 2.15 2.00 5 20 592 635 594 639 17 20 40 480 150 500 155 240 Max. 2.5 2.5 2.5 [1] 2.5 [1] V Units Test Conditions IF = 20 mA VF V
VR
IR = 100 A Peak of Wavelength of Spectral Distribution at IF = 20 mA
PEAK
nm
1/2 s C
nm ns pF
Wavelength Width at Spectral Distribution 1/2 Power Point at IF = 20 mA Exponential Time Constant, e-t/S VF = 0, f = 1 MHz Emitted Luminous Power/Emitted Radiant Power at IF = 20 mA
V
lm/w
RJ-PIN
C/W
LED Junction-to-Cathode Lead
Notes: 1. For options -xxRxx and -xxTxx, maximum forward voltage, VF is 2.6 V. 2. 2 1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity. 3. The radiant intensity, Ie in watts per steradian, may be found from the equation Ie=Iv/v where Iv is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt.
1.0 AMBER
RELATIVE INTENSITY
RED
0.5
0 500
550
600 WAVELENGTH - nm
650
700
Figure 1. Relative intensity vs. wavelength.
7
100
3.0
RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA)
IF - FORWARD CURRENT - mA
80 70 60 50 40 30 20 10 0 1.0 1.5 2.0 2.5 3.0 RED
2.5 2.0 1.5 1.0 0.5 0
IF - FORWARD CURRENT - mA
90
50 40 RJA = 585 C/W 30 RJA = 780 C/W 20 10 0
AMBER
0
20
40
60
0
20
40
60
80
100
VF - FORWARD VOLTAGE - V
IF - DC FORWARD CURRENT - mA
TA - AMBIENT TEMPERATURE - C
Figure 2. Forward current vs. forward voltage.
Figure 3. Relative luminous intensity vs. forward current.
Figure 4. Maximum forward current vs. ambient temperature.
100 90
RELATIVE INTENSITY - %
80 70 60 50 40 30 20 10 0 -25 -20 -15 -10 -5 0 5 10 15 20 25
- ANGULAR DISPLACEMENT - DEGREES
Figure 5. Representative spatial radiation pattern for 6 viewing angle lamps.
100 90
RELATIVE INTENSITY - %
80 70 60 50 40 30 20 10 0 -25 -20 -15 -10 -5 0 5 10 15 20 25
- ANGULAR DISPLACEMENT - DEGREES
Figure 6. Representative spatial radiation pattern for 15 viewing angle lamps.
8
100 90
RELATIVE INTENSITY - %
Intensity Bin Limits (mcd at 20 mA) Bin ID K L M N P Q R S T U V Min. 310 400 520 680 880 1150 1500 1900 2500 3200 4200 Max. 400 520 680 880 1150 1500 1900 2500 3200 4200 5500
80 70 60 50 40 30 20 10 0 -25 -20 -15 -10 -5 0 5 10 15 20 25
- ANGULAR DISPLACEMENT - DEGREES
Figure 7. Representative spatial radiation pattern for 23 viewing angle lamps.
Tolerance for each bin limit is 15%.
100 90
RELATIVE INTENSITY - %
80 70 60 50 40 30 20 10 0 -25 -20 -15 -10 -5 0 5 10 15 20 25
Amber Color Bin Limits (nm at 20 mA) Bin ID 1 2 4 6
- ANGULAR DISPLACEMENT - DEGREES
Min. 584.5 587.0 589.5 592.0
Max. 587.0 589.5 592.0 594.5
Tolerance for each bin limit is 0.5 nm.
Note: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. Please contact your local Agilent representatives for further information.
Figure 8. Representative spatial radiation pattern for 30 viewing angle lamps.
9
www.agilent.com/semiconductors
For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6271 2451 India, Australia, New Zealand: (+65) 6271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6271 2194 Malaysia, Singapore: (+65) 6271 2054 Taiwan: (+65) 6271 2654 Data subject to change. Copyright (c) 2002 Agilent Technologies, Inc. Obsoletes 5988-4274EN October 27, 2002 5988-8249EN

▲Up To Search▲

Price & Availability of HLMP-EL08-T0000

	To Download HLMP-EL08-T0000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .